博客
关于我
强烈建议你试试无所不能的chatGPT,快点击我
UVA 题目10010 - Where's Waldorf?
阅读量:4105 次
发布时间:2019-05-25

本文共 6766 字,大约阅读时间需要 22 分钟。

  

Given a 
m
 by 
n
 grid of letters, ( 
$1 \leq m,n \leq 20$
), and a list of words, find the location in the grid at which the word can be found. A word matches a straight, uninterrupted line of letters in the grid. A word can match the letters in the grid regardless of case (i.e. upper and lower case letters are to be treated as the same). The matching can be done in any of the eight directions either horizontally, vertically or diagonally through the grid.

 

The input begins with a single positive integer on a line by itself indicating the number of the cases following, each of them as described below. This line is followed by a blank line, and there is also a blank line between two consecutive inputs.

The input begins with a pair of integers, m followed by n$1 \leqm,n \leq 50$ in decimal notation on a single line. The next m lines contain n letters each; this is the grid of letters in which the words of the list must be found. The letters in the grid may be in upper or lower case. Following the grid of letters, another integer k appears on a line by itself ( $1 \leq k \leq 20$). The next k lines of input contain the list of words to search for, one word per line. These words may contain upper and lower case letters only (no spaces, hyphens or other non-alphabetic characters).

 

For each test case, the output must follow the description below. The outputs of two consecutive cases will be separated by a blank line.

For each word in the word list, a pair of integers representing the location of the corresponding word in the grid must be output. The integers must be separated by a single space. The first integer is the line in the grid where the first letter of the given word can be found (1 represents the topmost line in the grid, and m represents the bottommost line). The second integer is the column in the grid where the first letter of the given word can be found (1 represents the leftmost column in the grid, and n represents the rightmost column in the grid). If a word can be found more than once in the grid, then the location which is output should correspond to the uppermost occurence of the word (i.e. the occurence which places the first letter of the word closest to the top of the grid). If two or more words are uppermost, the output should correspond to the leftmost of these occurences. All words can be found at least once in the grid.

 

18 11abcDEFGhigghEbkWalDorkFtyAwaldORmFtsimrLqsrcbyoArBeDeyvKlcbqwikomkstrEBGadhrbyUiqlxcnBjf4WaldorfBambiBettyDagbert

 

2 52 31 27 8


Miguel Revilla 
2000-08-22

【大意】:

输入:

给你一个由字母组成的网格,M行N列。寻找一个单词在网格中的位置。一个单词匹配网格中联系不间断的字母。可以沿任意方向匹配,一共可以匹配八个方向。忽略大小写。

需要匹配的字符串有K个。

输出:

每组输出之间都一行空行。

m nm代表匹配的最上面的行

      n代表匹配的最下面的行

如果结果有多个,只输出匹配串。要求:匹配串的第一个字母必须是最高最左的。结果至少有一个。

【代码】:

/**********************************   日期:2013-4-23*   作者:SJF0115*   题号: 题目10010 - Where's Waldorf?*   来源:http://uva.onlinejudge.org/index.php?option=com_onlinejudge&Itemid=8&category=12&page=show_problem&problem=951*   结果:AC*   来源:UVA*   总结:**********************************/#include
#include
char Matrix[51][51];char str[21],temp[21];int StartR,StartC;//M行 N列int Match(int M,int N,int &StartR,int &StartC){ int i,j,k,flag; StartR = 51,StartC = 51; int len = strlen(str); for(i = 0;i < M;i++){ for(j = 0;j < N;j++){ flag = 1; //left - right if(j + len <= N){ flag = 0; for(k = 0;k < len;k++){ if(str[k] != Matrix[i][j+k]){ flag = 1; break; } } if(flag == 0){ if(StartR > i+1){ StartR = i+1; StartC = j+1; } else if(StartR == i+1 && StartC > j+1){ StartR = i+1; StartC = j+1; } } } //right - left if(j - len + 1>= 0){ flag = 0; for(k = 0;k < len;k++){ if(str[k] != Matrix[i][j-k]){ flag = 1; break; } } if(flag == 0){ if(StartR > i+1){ StartR = i+1; StartC = j+1; } else if(StartR == i+1 && StartC > j+1){ StartR = i+1; StartC = j+1; } } } //up - down if(i + len <= M){ flag = 0; for(k = 0;k < len;k++){ if(str[k] != Matrix[i+k][j]){ flag = 1; break; } } if(flag == 0){ if(StartR > i+1){ StartR = i+1; StartC = j+1; } else if(StartR == i+1 && StartC > j+1){ StartR = i+1; StartC = j+1; } } } //down - up if(i - len + 1 >= 0){ flag = 0; for(k = 0;k < len;k++){ if(str[k] != Matrix[i-k][j]){ flag = 1; break; } } if(flag == 0){ if(StartR > i+1){ StartR = i+1; StartC = j+1; } else if(StartR == i+1 && StartC > j+1){ StartR = i+1; StartC = j+1; } } } //right - up if(j + len <= N && i - len + 1 >= 0){ flag = 0; for(k = 0;k < len;k++){ if(str[k] != Matrix[i-k][j+k]){ flag = 1; break; } } if(flag == 0){ if(StartR > i+1){ StartR = i+1; StartC = j+1; } else if(StartR == i+1 && StartC > j+1){ StartR = i+1; StartC = j+1; } } } //right - down if(j + len <= N && i + len <= M){ flag = 0; for(k = 0;k < len;k++){ if(str[k] != Matrix[i+k][j+k]){ flag = 1; break; } } if(flag == 0){ if(StartR > i+1){ StartR = i+1; StartC = j+1; } else if(StartR == i+1 && StartC > j+1){ StartR = i+1; StartC = j+1; } } } //left - up if(j - len + 1 >= 0 && i - len + 1 >= 0){ flag = 0; for(k = 0;k < len;k++){ if(str[k] != Matrix[i-k][j-k]){ flag = 1; break; } } if(flag == 0){ if(StartR > i+1){ StartR = i+1; StartC = j+1; } else if(StartR == i+1 && StartC > j+1){ StartR = i+1; StartC = j+1; } } } //left - down if(j - len + 1 >= 0 && i + len <= M){ flag = 0; for(k = 0;k < len;k++){ if(str[k] != Matrix[i-k][j+k]){ flag = 1; break; } } if(flag == 0){ if(StartR > i+1){ StartR = i+1; StartC = j+1; } else if(StartR == i+1 && StartC > j+1){ StartR = i+1; StartC = j+1; } } } }//for j }//for i return 0;}int main (){ int i,j,Case,k,M,N; //freopen("C:\\Users\\XIAOSI\\Desktop\\acm.txt","r",stdin); while(scanf("%d",&Case) != EOF){ while(Case--){ scanf("%d %d",&M,&N); //输入字符矩阵 for(i = 0;i < M;i++){ scanf("%s",temp); for(j = 0;j < N;j++){ Matrix[i][j] = temp[j]; //转换为小写 if(Matrix[i][j] >= 'A' && Matrix[i][j] <= 'Z'){ Matrix[i][j] = Matrix[i][j] - 'A' + 'a'; } } } scanf("%d",&k); //待匹配串 for(i = 0;i < k;i++){ scanf("%s",str); int len = strlen(str); //转换为小写 for(j = 0;j < len;j++){ if(str[j] >= 'A' && str[j] <= 'Z'){ str[j] = str[j] - 'A' + 'a'; } } //printf("%s",str); Match(M,N,StartR,StartC); printf("%d %d\n",StartR,StartC); } //每组测试之间有空行 if(Case){ printf("\n"); } } } return 0;}

转载地址:http://nycsi.baihongyu.com/

你可能感兴趣的文章
[C++基础]034_C++模板编程里的主版本模板类、全特化、偏特化(C++ Type Traits)
查看>>
C语言内存检测
查看>>
Linux epoll模型
查看>>
Linux select TCP并发服务器与客户端编程
查看>>
Linux系统编程——线程池
查看>>
Linux系统编程——线程池
查看>>
yfan.qiu linux硬链接与软链接
查看>>
Linux C++线程池实例
查看>>
shared_ptr简介以及常见问题
查看>>
c++11 你需要知道这些就够了
查看>>
c++11 你需要知道这些就够了
查看>>
shared_ptr的一些尴尬
查看>>
C++总结8——shared_ptr和weak_ptr智能指针
查看>>
c++写时拷贝1
查看>>
C++ 写时拷贝 2
查看>>
Linux网络编程---I/O复用模型之poll
查看>>
Java NIO详解
查看>>
单列模式-编写类ConfigManager读取属性文件
查看>>
java中float和double的区别
查看>>
Statement与PreparedStatement区别
查看>>